Drywall Contractor & Drywall Repair in Pinehurst, TX | Spring Drywall Co.
Spring Drywall Co. is the drywall contractor serving Pinehurst, TX. We are insured, have 15 years of experience in this work, and build to ASTM C840 and GA-214 standards. Our work covers wall and ceiling repairs, new drywall installation, texture matching and water-damaged board replacement, along with hanging complete rooms, building new walls from bare studs, and priming and painting the drywall we install.
Pinehurst is in unincorporated Montgomery County, where interior drywall work is not subject to inspection.
Beyond Pinehurst we cover north Harris and Montgomery counties, and we go west into Waller County. Call (936) 286-6045 or use our quote form for a clear, written price on your project.
Why Choose Us
What Pinehurst Property Owners Get From This Drywall Contractor
Spring Drywall Co. builds every Pinehurst job to published standards, with one crew carrying the work from start to finish instead of passing it between trades. That is what you are buying here, and the three points below show you how to verify it.
- We are an insured drywall contractor, and our crews work to ASTM C840 for how gypsum panels are hung and fastened and to GA-214 for finish levels.
- We carry general liability insurance and can send our certificate of insurance before work begins.
- Our on-site estimates are free, the written estimate is line-itemed before you commit, and financing is available on larger projects.
The same crew hangs the board, tapes and fills the seams with joint compound, applies the texture by spray or trowel, then primes and paints the finished surface. We also serve the next town along the same highway as a drywall contractor in Tomball.
What a Drywall Contractor Looks After in Pinehurst
We work as a drywall contractor across Pinehurst, handling everything from a single patch to a full house of new board. The five jobs we handle most have their own headings below, with the rest of our drywall work collected at the end.
Drywall Repair
We repair the damage a wall picks up over the years: holes, cracks, water stains, seams that have opened and fasteners that have popped through the surface. We cut back to sound gypsum board, hang new material, then tape the seams and coat them with joint compound, the filler the trade calls mud, feathering each seam out so the patch disappears into the finish and texture around it. Sheetrock repair is the same job under the older name for the same panel.
Drywall Installation
We handle drywall installation around Pinehurst for whole rooms, additions, garage conversions, and outbuildings, hanging the board, fastening it with drywall screws, taping the joints, and finishing it to a named GA-214 level. On long walls, we plan every joint before the first sheet goes up, because a poorly placed joint is the one that shows later.
We hang new construction drywall to the builder’s or owner’s schedule in the subdivisions still being built around Pinehurst. In finished houses, we handle partition wall installation to divide one large room into two, along with metal stud framing where the walls are built with steel studs instead of wood. We also install insulation before drywall goes up, which is the cheapest time to do it because the cavity is open only once, and both sound transfer and insulation performance depend on what is inside it.
Water Damage Drywall Repair
We handle water damage drywall repair after roof leaks, failed supply lines, and condensation from an attic air handler reaching the ceiling below. Wet board and wet fiberglass insulation are removed rather than dried in place because both retain water after the surface feels dry. We compare the exposed framing and surrounding materials against dry reference readings before closing the wall. Where Texas law requires licensed mold assessment or remediation, that work is handled by a licensed mold professional first.
Moisture and mold resistant drywall goes back where the exposure justifies it, which means a bathroom away from the shower, a laundry or a kitchen. Inside the shower or the tub surround is different: we will not put ordinary gypsum drywall behind that tile, because it is not a wet-area material, and a cement tile-backer board goes there instead.
Drywall Finishing & Texturing
We handle drywall finishing as a separate stage, including taping, bedding, coating, and sanding the surface to a numbered finish level. Those levels come from GA-214 and define how smooth the finished wall is. Most walls are finished to Level 4, which looks flat under ordinary room lighting. Level 5 adds a thin skim coat across the entire surface and is what you want where a window or downlight hits the wall at a shallow angle, because that light exposes every ridge.
For texture matching, we spray the two finishes found on most Texas houses: orange peel, a fine spatter that resembles the skin of the fruit, and knockdown, the same spatter flattened with a blade into broader patches.
Ceilings & Popcorn Ceiling Removal
We handle ceiling drywall repair and replacement when a panel is stained, damaged, or sagging. A sagging ceiling points to a problem with the gypsum ceiling board itself rather than the paint, so we address the board instead of simply recoating the surface. We also perform ceiling drywall installation on new construction and after ceilings have been opened for other trades. Popcorn texture or other suspect material is tested by a qualified asbestos professional when its age or condition warrants testing before disturbance, and we scrape only material the results clear as safe. After popcorn ceiling removal, we leave the ceiling smooth or retexture it to match. We also install and repair acoustical ceilings in-house.
Other Drywall Work We Handle
We also handle commercial drywall for offices, shops, and light industrial interiors around Pinehurst. Where a tested rated assembly is required, we install fire-rated drywall systems, with the rating applying to the complete assembly of framing, fasteners, layers, and joints rather than to any single sheet. We build soundproof drywall installation as a full assembly as well, not as one thicker board. For finish and specialty work, we handle custom drywall and architectural features, drywall soffits and bulkheads, corner bead installation and repair, plaster repair, wallpaper removal, rehanging and reattaching drywall, and access panel installation. Our own crews also take care of drywall priming and painting instead of handing the room off to another trade.
What Drywall Work Costs in Pinehurst
These ranges give you a useful starting point for common drywall jobs in Pinehurst. Your own wall gets its price after we have seen it in person.
- We patch a small to medium hole in the $200 to $600 range.
- We repair the drywall in one room in the $150 to $1,500 range.
- We repair a ceiling in the $400 to $1,300 range.
- We rebuild a wall after water damage in the $600 to $2,500 range.
- We hang, tape and finish new board to a Level 4 finish at $2.00 to $3.00 per square foot.
Drywall repair cost here is driven first by how much of the wall is affected, because every stage after the cut takes longer as the repair area grows. Matching the surrounding texture is the next cost factor, and texture matching on its own runs $150 to $350. Where water has reached the framing, we open the wall first, so part of the price covers work that ends up behind a finish nobody sees.
When a Pinehurst Repair Becomes a Replacement
A damaged wall in Pinehurst gets one of two repairs from us. We either patch the damaged area, filling and taping it until the surface is level again, or cut out the board and install new drywall in its place. We make that decision after inspecting the wall, and what determines it is the condition behind the board rather than the size of the hole. A small crack can call for drywall replacement, while a hole large enough to put a foot through can still be a straightforward drywall repair.
What We Look At Before Patching or Replacing
We press on the board around the damage and check what repairs have already been made. Gypsum board, the paper-faced panel your walls are made of, softens and crumbles after water or repeated patching has worked through it, and once it reaches that condition it will not hold a screw or a fresh coat of joint compound. Board that far gone is past patching, so we cut it out.
We deal with wet or shifting framing before installing new board, because drywall fastened over a wet or moving stud fails the same way the original board did. Stress cracks, the thin lines that open along a seam or above a door as the house moves, show us where to investigate. When a crack has been filled before and returns, the wall is still moving rather than the wrong filler having been used.
The other limit on a patch is the texture, because some finishes do not blend cleanly across a new seam. The repair can show as a band of slightly different grain, raised just enough to catch the light after painting. When that is the risk, we cut the repair wider to a corner or stud line so the new seam lands where it will not show. Replacing a full run of board once can cost less than repeatedly patching a wall that will not hold the repair.
How the Age of Your House Changes the Repair
The same damage gets a different repair depending on when your house was built. In the early-2000s subdivisions, the original builder texture has usually been painted over several times, which stiffens the finish and makes it harder to blend across a new seam, while the framing has had twenty years to settle.
In the newer master-planned sections, the framing is still sound and the finishes are easier to match, so we patch more and replace less. On wooded acreage, the walls are longer with fewer breaks, which makes a replacement section larger but more straightforward to hang and finish.
Drywall Work by Pinehurst Neighborhood
The four named Pinehurst subdivisions below are distinctly different. One is gated and still completing its final phases, another is spread across wooded acreage, and the others contain older houses where the walls show their age. The subdivision you live in is a useful guide to the drywall work your home is likely to need.
Woodtrace: Finishing a Room the Builder Left Bare
Woodtrace is a gated community built in phases, so a finished street can sit beside one where houses are still going up. Owners there often want to turn a room the builder left unfinished into usable space, and that calls for new construction drywall: we frame the partition wall, fasten gypsum board to it, and finish it. We also add partition walls to existing rooms, installing them after the house is complete rather than building them in from the start.
Village of Decker Oaks: Matching an Early-2000s Builder Texture
The houses in Village of Decker Oaks went up in the early 2000s, and Decker Oaks Estates carries houses of the same vintage. Every wall in those houses was sprayed with one builder texture and painted over in the years since. So a patch there is a texture matching job before it is anything else, and our drywall finishing work rebuilds that same sprayed pattern in texture mud across the repair.
Cripple Creek Farms: Replacing Board After a Slow Leak
Cripple Creek Farms and Cripple Creek Farms West sit on wooded lots much larger than a typical subdivision lot, reached from paved roads rather than a subdivision loop. Houses like these have more wall area and less foot traffic past any one section, so a slow leak is usually discovered well after it begins. By the time a stain appears on a wall here, water has usually been sitting in the cavity for weeks, which means our water damage drywall repair starts beyond the visible mark and we expect to find wet batt insulation behind it.
Mill Creek Forest: Taking a Textured Ceiling Back to Smooth
Mill Creek Forest is an established part of Pinehurst with midsize houses rather than new construction, and ceilings are the main reason we are called there. Many still have popcorn texture, the bumpy sprayed coating, and popcorn ceiling removal takes that surface back to a smooth finish. On ceilings old enough for the texture to contain asbestos, testing comes first and we follow the results. Where ceiling board has sagged or stained, we treat it as ceiling drywall repair by replacing the damaged panel and refinishing the surface.
Drywall Jobs Out Along State Highway 249
A Pinehurst job sits somewhere along State Highway 249 or on one of the side roads branching from it, with no trade counter nearby. That is why we work out the full material list before the truck leaves, including board in the lengths the walls require, joint compound, paper tape, metal corner bead, primer, and paint for the finished surface. Coming up short means making a second trip, and that costs you a day you were not expecting to lose.
We settle access at the same time. On a gated street, that means arranging entry through the gate; everywhere else, it means deciding where the board can be unloaded and confirming which rooms are included in the job.
Plastic barriers, sealed doorways, and vacuum-assisted sanding are part of the base scope on every occupied-space job, not an add-on. Sanding joint compound creates a fine powder that travels easily from room to room, so we contain the work area and keep the rest of the house available to you while the job is underway.
When Pinehurst Drywall Work Needs a Permit
Pinehurst has no municipal government, so there is no city building department or city inspector reviewing work inside a house. Whether an interior remodel needs a permit depends on how your house is served, and Montgomery County handles that in three ways. On public water and sewer, interior work needs no permit. On septic, the question goes to the county's Septic Department, while work in the floodplain goes to Floodplain Administration. For most houses, hanging board, taping, and finishing a room is paperwork you do not have to file before we begin.
Where a Pinehurst Permit Would Come From
Houses on unincorporated land are permitted by the county rather than a city, and in Pinehurst that authority is Montgomery County. The office is Montgomery County Environmental Health through its permitting division, which issues a Development Permit. The county defines development broadly as a man-made change to real estate, including putting up a building, grading, dredging, clearing, or filling. Each of those examples involves the land or the exterior of a structure. Removing a damaged sheet of drywall from a hallway and replacing it does not. The office still matters, because once a job extends beyond interior work, Montgomery County Environmental Health is the authority you deal with.
What No Inspection Means for Your Records
No permit means no inspection, and without an inspection there is no third-party record showing the work was completed. The record you keep is the only one that remains. Three things are worth saving: the scope we agreed to before work started, any changes made along the way, and photographs of the wall cavity while it is still open. Changes should be put in writing rather than left to a doorway conversation. The photographs matter most, because once the board goes back over the cavity, nobody can see inside it again without cutting it open.
FAQ
Pinehurst Drywall Questions, Answered
What is different about drywalling a converted garage in Pinehurst?
The drywall itself is ordinary work, hung, taped, and finished like any other room, but a garage conversion has one detail that is specific to the job. The wall and ceiling separating the new room from any remaining garage space require board of a specified thickness and grade, so the material is chosen to meet that separation rather than by preference, and we hang what the separation calls for.
What does your written estimate cover?
Each part of the job appears as its own priced line, so you can see what each part costs. The board type and thickness are listed separately, along with the number of coats of tape and joint compound. Estimates name the GA-214 finish level as its own line item, so a Level 5 skim is a priced choice rather than a vague allowance. Any texture matching is listed on its own line, and primer and paint are listed where the job includes them.
How do you schedule a job out on State Highway 249?
We agree on an arrival window when the job is booked, so you are not left waiting for a time on the morning of the work. Our crews work Monday through Saturday, which gives us room to fit the start day around your week.
Can you match the texture in a newer Pinehurst house?
Yes. A house only a few years old usually has sprayed orange peel or knockdown applied across every room in one pass, so the pattern stays consistent and a mismatched patch stands out. We spray a test area somewhere out of sight first, then adjust the texture mud thickness and knife pressure until the new finish matches the wall beside it.
Do you work in Pinehurst, or only in Spring?
We work in both counties and regularly in Pinehurst. Our service area crosses the Harris and Montgomery county line, with Pinehurst on the Montgomery County side. That is why a permit question from Pinehurst goes to Montgomery County, while the same question from Spring goes to Harris County, with a different office handling it.
Request Your Free Pinehurst Drywall Estimate From Spring Drywall Co.
A Spring Drywall Co. crew comes to your property, looks at the wall or ceiling you need repaired, and measures the work in front of us. A written estimate follows, and the visit and the estimate both cost nothing. Call us at (936) 286-6045 or send the details through the quote form.